| • |
Advanced technology of PWM, DSP and IGBT switching components Designed to use a
high frequency, highly efficiency DSP/IGBT and PWM technology in converting DC
to AC power. |
| • |
True Galvanic isolation design Solve ultimately the problem of power system,
including noise, lightning, and leakage current etc. |
| • |
Multi-CPU design and software/hardware cooperate control Make the system
extremely high reliable. |
| • |
Plug & Play modular design To allow for each power circuit to be easily
removed for quick maintenance and troubleshooting. |
| • |
Each phase with individual inverter supporting Characteristics will not be
violated under 100% unbalance load. |
| • |
Protection against detaching and floating of the neutral of input power supply
Ensure the safety and stability of the UPS power output. |
| • |
Protection from user error Advanced circuitry prohibits damage to the system
when the user makes an operational mistake. |
| • |
Intelligent charger with temperature compensation Prolong the battery life
expectancy. And with huge charging power (selectable), can charge very big
capacity, long back-up time battery bank. |
| • |
Intelligent, safe battery test circuitry Test the battery without the risk of
output AC failure in case of battery bad. And with battery fluid leakage and
improper grounding detect circuitry, can ensure safety of the battery bank. |
| • |
Intelligent fan speed control Increase the fan life expectancy and reduce
audible noise. |
| • |
Reasonable heat evacuation passage design Main PCBs are designed in a holder to
separate the control circuitry and power circuitry. Therefore, the UPS system
can operate under harsh environment. |
| • |
Cool start function Can be started without AC mains (with battery only) and
protected from high inrush current. |
| • |
Variety of accessory (options) Remote control panel, 3 phases software for PC
monitoring, auto dialing module, battery monitoring module, 3 phases SNMP card,
and emergency power-off switch are available. |
| • |
Microprocessor design base |
| • |
Mini- remote control panel (option) |
| • |
Multiple output sockets |
| • |
Minimum foot print area design, light weight |
| • |
Built-In AVR for wider input range |
| • |
Auto re-charging whenever AC exist. |
| • |
Hot swappable battery by users |
| • |
RS232 communication port |
| • |
Tel/modem internet surge suppression |
| • |
DC Start function |
| • |
Green power function |
| • |
Auto detecting frequency 12-Pulse Full Controlled Rectifier (option) To reduce
total harmonic current and for UPS. |
